If the mobile phone is used for a long time, if it is not maintained, it will become dirty, and there will be scratches on the screen. Today, I'd like to share with you some smart tips of mobile phone Qinghao. Let's have a look!
How to wipe the screen clean:
1. Use toothpaste to remove scratches on mobile phone
Squeeze the right amount of toothpaste onto the wet cloth, and apply it evenly around the scratch on the mobile phone screen. You will find that the scratch on the screen of the phone will disappear. Isn't it amazing? The principle is that toothpaste is not only an auxiliary for brushing teeth, but also has the function of friction and repair, which can remove plaque, clean and polish the tooth surface. Therefore, it will have the same effect when used on the screen of a mobile phone.
2. Use detergent water or eyeglass care solution to remove dirty stains on mobile phone
Use detergent or eyeglass lotion for the outer screen, alcohol for the inner screen, dip a little with cotton cloth, and then dry it (soft glasses cloth is best).
3. Replace the old membrane that cannot be cleaned with new membrane
Buy a screen film, use the cloth inside the film to wipe the screen, no dust. As long as the screen sticker and mobile phone screen are wiped clean, the mobile phone screen will automatically bond and there will be no bubbles. If there are bubbles, tear off the film, rinse it with tap water, take adhesive tape to remove the dust on the side of the film, and then wipe the screen clean. Just be careful It will be easy to paste.
How to protect the mobile phone from being dirty in daily life:
1. Buy a mobile phone cleaning sticker
This is a magic series of cute pet mobile phone cleaning stickers, using Korean technology material TDS with fiber cloth, domestic original ultrasonic production, environmentally friendly and harmless, excellent cleaning effect, repeated paste without damage to viscosity, convenient and practical.
2. Choose one and tear off the cleaning sticker
Tear off the mobile phone cleaning sticker, which can be pasted on the back of the mobile phone and can be carried with you. If the mobile phone screen is dirty, you can wipe it at any time!
3. Wipe the phone screen
When the mobile phone screen is dirty, gently tear off the mobile phone cleaning sticker on the back of the mobile phone and wipe the mobile phone screen. The cleaning effect of the mobile phone cleaning sticker is excellent!
4. Mobile phone cleaning stickers can be washed in water
After cleaning the screen with water, it is fresh and can be reused, and can maintain the original performance.
5. Tear off the mobile phone cleaning sticker card, can also be used as a bookmark, clip in the book is also very beautiful
Methods for removing bubbles from plastic film:
1. Preparation tools: scissors and transparent tape, and a small piece of cloth
2. First, use a small piece of cloth to push out the bubbles that can be squeezed out. Fold the cloth a few times and use its edge to push bubbles.
3. There are still bubbles that can't be pushed off. Why can't they be pushed off? Because there is dust, which is the dust in the formation of bubbles, we need to take out the ash method to remove the bubbles.
4. Cut the tape one to two inches long and stick it on the side of the film with dust bubbles. Then cut a small piece of transparent tape with the adhesive side up.
5. At this time, use one hand to pull up the transparent tape pasted on the film, and use it to pull the film up to a seam. As long as one seam is pulled, the tape of the other hand can enter. In order to let everyone see clearly, it is easy to get more dust when it is pulled too large.
6. After pulling it up, you can see whether there is dust on the film or on the screen of the mobile phone. If you look carefully, the dust is very small, and then use the transparent tape on the other hand to stick the dust. This dust will stick out, you see no bubbles. We remove the rest of the dust in the same way.
The method of removing bubbles from the toughened film is as follows
Method 1: clamp with clip
Find a clip with larger clamping force. Before going to bed at night, clamp the bubble on the edge of the mobile phone screen. Clip it overnight. When you get up the next morning, you are surprised to find that the bubble has disappeared!
Advantages: simple, easy to find and buy
Disadvantages: accidentally clip slip, the edge of the mobile phone will be scratched by the iron edge of the clip, so the owner accidentally injured the paint of the mobile phone.
Method 2: blow with a blower
The method is to use the heat of the blower to soften the toughened film, blow the bubble with hot air for a period of time, and then press and hold the bubble for a period of time, repeatedly, so that the toughened film is easier to fit the mobile phone screen.
Advantage: the bubble in the screen is easy to clear.
Disadvantages: bad grasp of the time and heat blowing, easy to damage the screen. This method combined with one method is effective.
Method 3: use human body lubricant or liquid glue
The phenomenon is that there are always bubbles on the edge of the screen. After pressing down, the bubbles will disappear at that time, but they will appear again after a while. This kind of bubble is often distributed at the edge of the screen, and the air always enters through the gap between the toughened film and the screen.
The method of use is to take a small amount of liquid on the toothpick and other objects, gently pull the edge of the bubble, forcing the liquid to slowly flow into the bubble, so that the liquid fills the gap between the screen and the toughened film. Don't forget to press the bubble during this period. This method is very good and does not cause much damage to the mobile phone. But there are some technical requirements.
