In the cold winter, the hot water at home must be enough, but if you want to turn on the faucet to flow hot water, I'm afraid it will use electric faucets. Electric faucets have advantages that water heaters and solar energy can't compare. Although they can produce hot water, the water in the water pipe is still cold, so you need to finish the water in the pipe before you can use hot water.
The electric faucet can let you turn on the tap and have hot water. The so-called electric faucet is commonly referred to as the fast heating faucet, which is through instantaneous flushing heating, so that the water flowing out of the faucet is hot. As a new product, how to install the electric faucet?
Step 1: first remove the original ordinary faucet
First of all, close the water pipe valve, remove the original non electric water hose, and clean the pipe joint with clean water to avoid excessive rust and infarction.
Step 2: assemble the parts
1. Connect the elbow of the electric faucet with the body of the electric faucet, and fix the machine.
2. If you want to use a washbasin, screw off the nut on the water inlet of the body, and fix the electric faucet on the washbasin; if you don't need a washbasin, you can omit this step.
3. Then connect the electric faucet with the water pipe.
Step 3: check
1. After installing the electric faucet, first turn on the water valve switch to check whether there is water leakage at the connector.
2. Then turn on the electric faucet switch to drain water to the machine, and turn on the cold and hot water switch back and forth for several times.
3. Plug in the power supply after exhausting the air bubbles in the machine completely.
4. Adjust the hot water to the required position, because the temperature of the hot water is regulated by the hot water size control switch. When the red light is on, it will indicate the start of heating.
Precautions for installation of hot water faucet:
1. After the installation of the electric faucet is finished, the water shall be supplied first and then the power supply shall be connected. The handle shall be rotated up and down to see that there is water flowing out of the water outlet, and then the power supply can be used. (first use only).
2. The electric faucet has two kinds of water flow: cold and hot. When the hot water is cut off and cut off, it is not necessary to pull out the power frequently.
3. The electric faucet is installed by pressure. When the switch is turned to the hot water direction, it will start heating automatically. When the switch is turned to cold water, it will not consume any electricity. It is easy to use and save water and electricity.
The above is the specific installation steps of the electric faucet. After the installation is successful, you can use hot water very conveniently. Generally speaking, you can use warm hot water within 3-5 seconds of opening the faucet, and it will no longer be affected by the cold. Besides, it is also very small and convenient, and it is an indispensable good helper in your home.
